  |
| Organization |
| Teamwork |
| Management |
| Manufacturing |
| Culture |
| Quality & Service |
| Marketing & Sales |
 |
Products
Drying & Dehumidifying
SHINI drying & dehumidifying series has been designed for drying plastic raw materials with a stable low dew-point air below -50°C with the maximum drying capacity of up to 750 kg per hour (in the case of PET) Each of them includes the microprocessor control and precise temperature control.
Conveying & Mixing
SHINI feeding & conveying series is intended for decreasing manual handling and improving efficiency.
Digital microprocessor control, automatic cleaning and shortage alarm are included. Closed-loop conveying process reduces material waste, avoids moisture re-absorption of the dried material and is a best system for dust free operations.
Heating & Cooling
SHINI heating & cooling series is intended for plastic industry.
The precise mould temperature controllers are designed for cooling mould temperature to achieve higher quality of the product surface finish and lower cycle time.
The compact and portable water chillers are suitable for machine cooling.
The series of heating and cooling equipment is suitable for a precise water or oil temperature control between 7℃ and 300℃.
Granulating & Recycling
SHINI granulating & recycling series has been designed for the instant recycling of sprues and wastes, and for the central waste recycling.
The safety devices are designed to meet CE safety requirements.
The robust construction and soundproofed interior make these machine both strong and their noise level below 85db.
INTRODUCTION | ORGANIZATION | CULTURE | MANAGEMENT | MANUFACTURING | QUALTY & SERVICE | MARKETING | SALES NETWORK | PRODUCTS