/ep_edm/en/contect_1225.html SHINI PLASTICS TECHNOLOGIES, INC.

Experience Sharing

2017 Quarter 4 Issue 33

An Experience Sharing of Central Conveying System--Reactive Refilling System

Share to:

A company in Chongqing is specialized for producing auto parts, being mainly engaged in plastics injection molding, surface coating, plastics blow molding and surface draping.


This time, it plans a central conveying system that consists of 30 injection molding machines. The machines are of high quality and the layout of them is reasonable. Besides, the scientific layout of workshop that covers over 7,000 square meters echoes with that of material room, being quite orderly.



There are seven blowers (one backup), a material room, 30 hoppers as well as 30 dryers. These white dryers are arranged based on their models, being quite artistic.


For the long-term use of the machine, six central filters are all equipped with cyclone dust separators, which filter dusts in the pipe and protect the blower in an all-round way. Thus, the blower becomes clean and enjoys longer service time.


The most distinct point of this conveying system is reactive refilling system.


A screen of an “all-in-one” machine is able to control material loading of the whole conveying system, including 30 injection molding machine, 30 dryers and 30 proportional valves. As requested by customers, the central hopper receivers in all injection molding machines are equipped with separated button control box, and inside the box there is a reset button, a button of refueling and an alarm.


When the materials of an injection molding machine need to be changed, the button of refueling should be pressed to stop hopper from suction. At the same time, feedback signals would be sent to the central control station, and the information would be flash on the screen installed in the material room, so as to send signals to the main engine that it is time to change materials. In addition, the alarm would send a signal with frequency of two seconds. If one wants to withdraw the call of material change, he should press the button of refueling for three seconds; and if a machine is in material shortage, the buzzer would sound an alarm with frequency of one second. At that time, the button of reset should be pressed to achieve normal material conveying.



This system can not only make remote communication, but also enjoy convenient operation, powerful function and good counter-error effects. Since its release, it has always been well received by customers thanks to its stable and reliable performance and a well-arranged workshop.



In the craftsmanship, Shini group always practices self-challenge and makes innovation, never slowing down its pace in pursing excellence. Shini, with a professional team, will make much more fresh progresses in the future.