Product Improvement
Heatless Dehumidifying Dryer SHD-U-HD
Features
■ Microprocessor for accurate temperature control.
■ Special down-blowing pipe, to spread hot air evenly, keep material dry with constant drying temperature and to improve drying efficiency.
■ Digital P.I.D. control, LED display.
■ Overheat protector to avoid any damage due to man-made factors or mechanical default.
■ One week timer for auto start/stop to save power.
■ SHD-80U-HD、SHD-120U-HD adopt well sealed material window, easy open for material cleaning.
■ Aluminm base with stainless steel liner.
■ Equipped with heatless regeneration device to deliver low dew-point dry air, low energy consumption.
■ Euro suction box, floor stand, hopper magnet, magnetic base are optional accessories.
■ Hot air recycler to reduce energy consumption.
Key Improvement
■ Equipped with heatless regeneration device, using pressure absorbing principle to realize regeneration, to deliver constant low dew-point air for material drying, to shorten the drying time and reduce the cost.
Performance-Price Ratio
■ Equipped with heatless regeneration device, no need to heat heating for regeneration, to deliver constant low dew-point air for material drying.
■ Compared with traditional dryer, drying time is shortened , but with better drying effect, not affected by humidity of the environment.
■ Less energy consumption than honeycomb dehumidifier. It is the best choice for drying engineering plastics, which requires low humidity air, and traditional dryer is unable to dry.
Application
■ Suitable for drying engineering plastics, not requiring too low humidity, such as:ABS、PC、PE、PVC、PBT. It can be installed directly on the machine or fixed on floor stand and using hopper loader to convey the material to the machine.
Q & A
■ Q: What is the air dew-point of SHD-U-HD?
■ A: SHD-U-HD can produce lowest dry air dew-point of -40℃.
■ Q: What is the normally air consumption of heatless regeneration device?
■ A: SHD-40U-HD air consumption:0.19m3/min(max.). SHD-80U-HD air consumption:0.25m3/min(max.). SHD-120U-HD air consumption:0.38m3/min(max.).
■ Q: Normally, what is the compressed air pressure required by heatless regeneration device?
■ A: 4~10kgf/cm2.
■ Q: What is the life-span of heatless regeneration device?
■ A: Generally two years, but it is replaceable.
■ Q: Is dew-point monitor optional for SHD-U-HD?
■ A: Yes.
Product Improvement
- Separate Vacuum Hopper Loader SAL-UG
- Vertical Mixer SVM-U
- Belt Conveyors SV / PNL
- Water Heater STM-W
- Dual-Purpose Water/Oil Heaters STM-W/O
- Central Filter SCSF
If you want to read other articles, back to2009 Quarter 4 Issue 1.