Powder-removing Hopper SHR-CR-3U

Features: 

• Hopper and base can be adjusted towards any directions within two dimensions, which make it easy to operate.
• Feature a convenient installation and easy repair.
• Contact surface adopts stainless steel materials.
• Material level sensor is adjustable to control material level at clients’ will.
• Upper part of hopper is made of glass pipe, which makes it visible to monitor elimination of powder.
• Eliminate powder with a high efficiency by adopting method of air suction boiling materials.
• High temperature resistant feature allows dried material to be absorbed without being cooled.
• It can be installed directly on the feeding mouth of molding machine.

Performance-Price Ratio:

Adopts unique-designed air flow to eliminate powder of resin with a high efficiency, also has the function of eliminating sundries.

Application:

A small size of body and light weight make it easy to install, suitable for powder-removing situations with strict requirement of powder containing ratio. SHINI optical-class system is optional.

Q&A：

Q: How to remove powder by using SHR-CP series models?
A: SHR-CP series adopts method of air suction boiling materials to eliminate powder. When raw material gets to the position near strainer and drops down because of its heavier gravity than that of blower, powder contained in raw material is absorbed into filter because of light weight through strainer so that the aim of removing powder out of material can be achieved.
Q: Is SHR-CP capable of removing powder in material thoroughly?
A: No. The reason is that a certain amount of powder would adhere to the surface of material due to static. The efficiency of powder-removing is equal to or more than 80%.