/ep_edm/en/contect_432.html SHINI PLASTICS TECHNOLOGIES, INC.

Special Reports

2011 Quarter 1 Issue 6

2010 Seen Shini Brilliant Achievements

Share to:

The year of 2010 passed as the age of carrying forward and forging ahead for Shini group, which is one of world-class plastic auxiliary equipment manufacturers. Shini group made outstanding achievements in business and strode forward to become international-scale enterprise. According to General Manager Kenny of Shini group, up to the end of November 2010, market sales have increased by 100% compared to that of same period with the economic downturn in 2009, exceeding the expected goals throughout all year. Kenny explained that there are five factors resulting in such a tremendous achievement. The first thing above all comes out as the 40 years developments of global brands and reputations; secondly Shini adopting product strategy of diversification gains a lot in plastic auxiliary equipment manufacture; thirdly it should be counted on the continuous capacity improvement; fourthly Shini has an excellent staff team with strongest bonds; and last one is constant favorably developing of market, which provides impetus for Shini group to advance especially in China Manland.

 

Focusing on the strategy of One site of R&D, five production bases for open up global market”, Shini group has experienced 41years progresses. Relying on the principle of Focusing on particular business, pursuing to be the world leader”, Shini group also have grew up as the world-class plastic auxiliary equipment manufacturers. Confronting such highly-appreciated achievements, Shini group does not stop its pace to advance itself and continuously intensifies the efforts of investment and research with rich funds and high-tech in order to extend products lines both horizontally and longitudinally with regards to auxiliary equipment for plastic molding. Currently Shini products series range from drying plus conveying and metering plus mixing of plastic material, from mould temperature control to cooling system for molding machinery, from auto-robots to granulating plus recycling of wastes and molding workshop system. There are mainly eight series of products in Shini including Dehumidifying & Drying, Feeding & Conveying, Mixing & Dosing, Heating & Cooling, Granulating & Recycling, System Solution, Hot Runner System and Robots. After reviewing the development in 2010, Shini group will continue her voyage for making more progresses.

 

Shini Pinghu factory has been under construction since 2008 in the hope of establishing a biggest production base for plastic auxiliary equipment around the world. It is estimated that, after it is completed and put into operation, annual production value will amount to 500 million RMB. The phase one of production went into operation smoothly on February 2010 and original Shini Ningbo factory has been relocated to Pinghu Economic Development Zone while present Ningbo factory majors in metal casting production with the aim of laying foundation for further expansion of auxiliary engineering; on May 2010, new plant of automation business department has made completion and started using. Since the foundation in 2008, automation business department has fulfilled the successful developments of basic models with a total sales number of over 600 units of robots, soma of them are available for 3,600 ton molding machine. Following automation business will stress on the development of multi-articular running start in domestic sales; also Shini group invested more than 1 million RMB to establish Water Chiller Performance Laboratory, which largely saves times for design development and provides strong support for the promotion of product quality.

 

It is worth mentioning that on September 2010, Shini group joined with Italian Syncro Corporation to establish Shini-Syncro Extrusion Process Cntrol (Dongguan), Inc., which plans to supply extrusion technologies for the manufactures in the mainland and Asian regions. There are many models with features below: 1, Gravitational dosing and mixing system: this high-precise system with exclusive patent is capable of serving for assembly line in which material is mixed in constant proportion; 2, Central feeding system: it is mainly used to pre-process and make central distribution control for extrusion assembly line; 3, Thickness film measuring and control system: it is applicable for online measure and control of film thickness. By adopting advanced technique, material waste can be greatly reduced and physical performance can be highly promoted such as anti-tearing, haze and elongation, especially drop hammer strike performance; 4, Central monitoring system for extrusion assembly line: both successive weight-loss weight batcher and central monitoring technique are adopted to fulfill the gross control, tension control and temperature control for extrusion assembly line with a high demand for quality.

 

Energy saving and pro-environment highlight the subject at modern times. Accordingly Shini group launched a series of energy-saving products including pro-environmental chiller with new refrigerant, SCD-ES all-in-one compact dryers and water heaters using magnetic pump. The former widely-used refrigerant R22 has been listed as controlled item for its harm effects on ozone layer and it will be forbidden to be used in Europe, USA and China in 2010, 2013 respectively. For this issue, Shini group launched Chillers with R410A refrigerant, which is capable of substituting R22 and Shini also finished all the substitute of refrigerant; SCD-ES series makes dehumidifying, drying and conveying all in one unit to fulfill automation, specially suitable for dehumidifying engineering plastic with strong hygroscopicity with saving energy consumption as much as 40%. The technologies included in SCD-ES have obtained patent or under applying; water heaters with magnetic pump adopts Shini self-developed magnetic driving pump to eliminate leakage path of shaft seal in order to ensure a long and stable operation of pump.

 

2010 also saw Shini group actions of perfecting its corporate including making profile video, aiming to give an account of Shini 40 years developments from pioneering to creating brand; website of shini.com has been revamped and put on line with a vivid and wide layout. Functions like epaper, technique support and search have been added.

 

When speaking of Chinese market, Kenny Wu said the market capacity of Chinese plastic industry is tremendous and it has been keeping a vigorous impetus for many years for even after 2008 financial crisis, China presents its unique charms and absorbs global competitors. With regard to this, Shini group is fully confident to be winner during harsh and benign competition of technology, quality and service. However, we can not ignore fact that in China, there are single individuals or companies who is still conducting the illicit competition by violating others interest and counterfeiting Shinis products. Kenny Wu also added that major product of Shini group has successively applied for the patent of utility model and external design. Shin got exclusive authorization for its own picture album and brand Shini incluiding   and . Shini English brand has been listed as Guangdong famous trademark and enjoys high popularity. During past years of protecting rights, Shini wins lawsuit one after another while other persons involved still disregard law and judgment by infringing upon Shini products continuously. Hereby Shini group reminds customers of recognizing Brand and Producer. Currently there are five factories and one R&D institution in Shini group which include Taiwan Shini Plastic Technologies (New Taipei), Inc., Guangdong Shini Plastic Technologies (Dongguan), Inc., Zhejiang Shini Plastic Technologies (Ningbo), Inc., Zhejiang Shini Plastic Technologies (Pinghu), Inc., India Shini Plastic Technologies (Mumbai), Inc., and Guangdong Shini Corporate Technology Center (Dongguan).

 

The present Shini accomplishment stems from the 40 years painstaking efforts of two generations. Shini group strives to become leading role in Chinese plastic auxiliary equipment manufacture with outstanding service and competitive price plus quality. Shini group always welcome industry counterparts to make common progress during learning the diligent spirit and theory of keeping forging ahead while we will take actions to deal with any counterfeit and infringing. Therefore, Shini group sincerely invites all the companies to build a favorable image of Chinese corporation and push domestic plastic industry ahead for global powerful manufacture.