Hot Runner System Success Stories

By the joint efforts of the foreign business department and our foreign agents, we sold our hot runner system products to Europe for the first time. This case is the proud of our department. Our manager Mr. Liu attaches great importance to the production of the orders. He went to the workshop to inspect the production processes, design specifications and the quality detection, as well as the work of each participating employees. Under the leadership of Mr. Liu, we finished the production on time and deliver them to the customer before the busy Spring Festival which won us big praise.

Temperature Controller

Features of Shini hot runner temperature controller

Test the temperature of hot runner system. Stabilize the target point temperature by adjusting the output power.

Temperature controller using microprocessor control, the control accuracy of which is up to 0.5℃. Double LED digital display, with a variety of fault status display and alarm and it also can find and resolve the problems in time. Output interface using internationally accepted scale industrial socket which is widely used in hot runner systems worldwide. J-type and K-type thermocouple can be interchangeable.

Hot runner temperature controller, equipment which can to maintain the desired temperature value of hot runner system continuously, consists of temperature control card, air switch, box, fan, terminal blocks and cables.

PID self-tuning capabilities to ensure continued accuracy of temperature control, dual power input and output.

The latest micro-electronic circuit temperature controller to ensure the reliability and stability.

Temperature accuracy is 0.5 degrees Celsius.

Soft-start warm-dehumidification function, to automatically adjust the output power to prevent the instant start, prolongs the life of the heater.

To switch J and K type thermocouple type temperature line.

Automatic control, manual control and standby mode can be chosen.

Produced in the process can display the temperature and current, the percentage of output power.

Simple and understandable diagnosis signals. Thermocouple can be displayed circuit or reverse, disconnect the heating coil, high and low temperature alarm, etc.

After the thermocouple circuit, switch on the manual mode to ensure continuity produced.

Working voltage is 240VAC (50/60Hz) or110VAC (50/60Hz), working current up to 15A.

Pull in or pull out the temperature control card in the case of power supply, the temperature controller will automatically delay the heater to prevent the burn temperature control card.

Characteristics of Shini hot runner temperature controller

The accuracy of temperature control systems, self-protection and fault tolerance depends on the temperature control function of the card.

Our hot runner temperature controller has a good appearance which sheet thickness of 2.5mm, and can withstand 180kg of weight. Temperature control card has high control precision, self-protection and fault tolerance. Temperature control card size, electrical interface is compatible with other brands and.

Hot runner temperature controller detects the temperature of hot runner system by using its built-in temperature control card (MCU as the core). By adjusting the output power to stabilize the target point temperature.

Hot runner temperature controller, equipment which can to maintain the desired temperature value of hot runner system continuously, consists of temperature control card, air switch, box, fan, terminal blocks and cables.

Temperature control accessory is the international scale heavy duty connector, usually the 4 groups or less hot runner temperature controllers are equipped with 16-pin Terminal Block, 5 groups or more with 24-pin. Wiring form determined in accordance with customer requirements; supporting cable (optional) matches with the temperature controller terminal blocks.

Shini hot runner system operation notice
For accurate operation of hot runner temperature controller, to avoid the errors due to manipulation that cause damage of hot runner temperature controller or personal injury, be sure to note the following points:

Check the safety of the power.
Check if the controller matches the safe voltage.
Check if the connector is secure.
Check if the heater is safe and reliable.
Check if the main power is off.
Make sure the ground wire connect the controller.
Switch on the main power.
Switch on each controller.
Set the controlling temperature, observe whether the temperature displays rise stably.