STM1 / Single Axis Servo Robots (Telescopic Type)

Features：

• Appearance
The series of robot design with European-style streamline. Beam, crosswise and vertical arms using the standard section with compact and attractive appearance.

Single Axis Servo Robots (Telescopic Type)

• Precision
This series using the import servo motor, and with high - precision steel wire belts cooperate with linear guides to achieve the stretching, run fast. Sucker and gripper worked by gear rack and gear wheel removing with cylinder driven and remove smoothly.
• Security
There are external oleo - strut and proximity switch in the limit poison of the arms removing down, kick and traverse, accuracy limit and sucker with the expire protection device. When expire suddenly happened, the device can lock the arms and sucker clamps. Soft ware and hard ware double protection function, ensuring the injection moulding machine and robot safe operation. The design of I/O short circuit protections avoids the damages from the short protection. Pass the CE-EMC testing, high reliability and strong anti jamming capability.
• Conveniences
Using the sliding block fixed all the limit devices. The customer can adjust according what they needs. Drag link using the world - famous brand, easy to install and uninstall electrical support using the enable move design, easy to install and maintain.
• Standardization
All pneumatic components adopt the world - famous brand products, high quality and good compatibility. The interface of the injection moulding machine design with the standard of Euromap12, Euromap67 and SPI.
• Intelligence
The controller with humanization interface, easy to operate, and having self-diagnostic function, show the alarm and the cause of the trouble in time, and increasing the alarm memory function, this function can remember the alarm information up to 50 track records, and memory 20 standard programs of sequence of operation. Having 80 user defined action programs depend on the customers’ demands. Flexible teaching function, the programs can be required to teach and store by themselves.
• Humanization
Use the EU quick connector connecting signal, plug and play, demolition convenient; Traverse servo driven control with multi-point pick and multi - point placement function; and with multi - lingual for customers in different regions. Reserved interfaces for ancillary equipment.

Advantage：

The same quality as European, American products, better price. Compared with the same products of cinese competitors, SHINI product possess with more security and stable performance. Signal with interim connection for easy maintenance and replacement.

Application：

The STM1 series robots are used for rapid and precise removal of runner for recycling after molding, finished products lay aside in the position where needed.

Q & A：

Q: How many models of STM1? And whats the appli-cation?
A: There are three models STM1-900-1600(D), STM1-1800(D), STM1-1300-2000(D) available for the use with plastic injection moulding machine 300T, 450T and under 650T.
Q: STM1 is available for which model of moulding?
A: This series can also offer the double-arm type and single arm type for the customers requirements. Single arm type is suitable for the 2-plate mold users or hot-runner mold users. Double-arm type is suitable for the 3-plate mold users.
Q: Whats the difference between single axis double stage servo driven beam robots and single axis single stage servo driven beam robots?
A: Compared to single axis single stage servo driven beam robots, single axis double stage servo driven beamrobots has two features: 1, the arm speed of down motion is faster. 2, the height is lower, being suitable for low workshop.