/ep_edm/en/contect_92.html SHINI PLASTICS TECHNOLOGIES, INC.

New Product Launch

2010 Quarter 1 Issue 2

SG-43 / Sound-proof Central Granulators

Share to:

 

Features:

• Optimized structure and full-closed sound - proofing ensure low noise level.
• High rigidity material made cutting chamber after processing by CNC machine has the features like high intensity, super wearability, no contamination, long service life and easy for maintenance and repairing.

SG-43 / Sound-proof Central Granulators


• The initial cut-off point of machine with cutting chamber design is high, applicable to grind thick walled objects and sheet.
• Paddle blades design allows increased efficiency.
• The cutters are made of imported high quality steel featuring wearability, high rigidity and reusable after sharpening.
• Simple cutter installation adjusting technology makes the rotating blades and fixed blades be adjusted within clamps outside machine, no longer needs to be adjusted from inside of machine as before.
• Equipped with electrical current relay, motor overload protector and multiple safety devices, to ensure safe operation.
• For fibre-added material, fibre-added model is for option, Adopt surface-hardening treatment on the material contacting components blade material is V-4E joint with S50C.
• Regrind conveying system as standard.
• Dust cyclone separator can effectively remove the dust from regrind and facilitates the material collecting.
• Anti - vibration pads absorb vibration from SG-43 series.
• Dust separator system is for option, can effectively remove the dust from cutting chamber. And the height of the floor stand can be adjusted on different requirement.

 

Advantage:

SG-43 series were developed between SG-36 and SG-50, cutting chamber design refers to SG-50 series, external design refers to SG-36 series. They have the similar performance with SG-50 series, but lower price, which is cost-effective.

 

Application:

SG-43 series are suitable for centralized recycling of waste and rejected parts from injection, blowing molding and extrusion lines. When the wastes materials with fiber or nearly fiber (CPVC), granulator with model "F" noted is recommended.

 

Q & A:

Q: What are the advantages of SG-43 series? And whats the difference compared with SG-36?
A: The main advantage of SG-43 series is that the initial cut-off point of machine with cutting chamber with machine design is high, applicable to grind thick walled objects and sheet. The difference with SG-36 is cutting chamber design. (Refer to figure)
Q: Whats the maximum dimention of materials for SG-43 series?
A: A: For shelled material, SG-4360 as an example: it can be crushed as long as fed into cutting chamber, and the length is less than 600mm, the width is less than 400mm, and the height is less than 350mm.
B: For solid materials, the thickness is less than 100mm, the length dimension is less than 100mm, and the width is less than 100mm. It depends on circumstances for the larger materials.
Q: Is it available for SG-43 series to cut materials with fibre of 30% or above ?
A: Yes, fibre-added model is available. Cutting chamber contacting materials is processed with surface-hardening. Blade material is V-4E jointed with S50C.