Directory of Latest Issue
2013 Quarter 4 Issue 17
2013 Quarter 4 Issue 17 Message from the Chief Editor
The general technological process of plastics molding is as follows: drying, conveying, mixing, injection molding, cooling molding, taking out and recycling of wastes. Plastics auxiliary equipment is widely used in this process. According to their applications, they can be divided into the following types: dehumidifying & drying, feeding & conveying, dosing & mixing, heating & cooling, automatic robot and granulating & recycling, etc. Then what important roles are these kinds of plastics auxiliary equipments playing? Please see the application of plastics auxiliary equipment in this issue of View of Shini.
Central cooling system, just as its name implies, is a system for central providing cold water to devices in a particular area. It’s built by the following way: choose appropriate cooling devices and project integrated layout according to parameters which are obtained by calculating basing on information of the required temperature, pressure, flow of cooling water and plant layout, etc. Please read this issue of View of Shini for more details.
Along with the development of industrial technology and requirement of improving efficiency, material feeding of molding machine tends to be automatic, intelligent and user-friendly. There are two main ways of feeding: system control or individual setup. It’s necessary to consider all kinds of conditions to see what kind of device is the most suitable for production when choosing central feeding system of injection molding machine or conveying of one machine. System control or individual setup? Please refer to this issue of View of Shini.
In addition, any opinions about View of Shini are welcome for us to improve the journal and to provide the technology of product and information of industry which you need.
Best regards and wishes!
Central cooling system, just as its name implies, is a system for central providing cold water to devices in a particular area. It’s built by the following way: choose appropriate cooling devices and project integrated layout according to parameters which are obtained by calculating basing on information of the required temperature, pressure, flow of cooling water and plant layout, etc. Please read this issue of View of Shini for more details.
Along with the development of industrial technology and requirement of improving efficiency, material feeding of molding machine tends to be automatic, intelligent and user-friendly. There are two main ways of feeding: system control or individual setup. It’s necessary to consider all kinds of conditions to see what kind of device is the most suitable for production when choosing central feeding system of injection molding machine or conveying of one machine. System control or individual setup? Please refer to this issue of View of Shini.
In addition, any opinions about View of Shini are welcome for us to improve the journal and to provide the technology of product and information of industry which you need.
Best regards and wishes!