SHINI PLASTICS TECHNOLOGIES, INC.

よく発生する問題

Granulating and Recycling

Q1.When turning SG-2427 on (with nothing inside), it runs for about 10 min and then trips the overload for the main motor.

Please check whether the value of Thermal overload relay was less than normal. Adjust it as 1.1 times as the rated current of the motor.

Q2.Are the rotating blades of SG-16 and SG-20 same?

The size of fixed blade for SG-16 is 68.5x24x5, while that of SG-20 is 69.5x25x8.