 |
 |
Language |
Сушильные загрузочные устройства – SDL
E-Catalog
Introduction
Сушильные загрузочные устройства серии SDL «Стандарт» интегрируют пластиковую сушку и погрузку в один блок. Особенно применимы к таким большим литьевым машинам под давлением, которые размещены в цех, ограниченный в высоте. Эта комбинация предлагает группу стандартных бункеров с фотодатчиком, которые могут быть использованы для загрузки высушеных материалов. Кроме того, SAL-900G доступна для реализации двухступенчатой функции загрузки.
'Свойства
- Adopts P.I.D. temperature controller to accurately control regenerative temperature.
- Various model for customer to choose freely.
- Takes little space and easy for transportation.
- Stainless steel hopper ensures no material pollution.
- Hopper separated from its base, which ensures convenient cleaning.
- A closed loop material loading system to prevent the dried material from contacting with outside air so to avoid moisture reabsorption.
- Hopper is ready for polishing so to ensure no material pollution.
- Equipped with alarming light to show faults at once.
- Single tube suction box is a standard accessory.
- SDL-300 and even smaller models below it are equipped with standard base. SDL-400 and even bigger models above it are equipped with magnetic base.
- SDL integrates drying and single stage loading into one unit, adopts temp. controller to accurately control temp. 24-hour timer is available for choose.
- Environment protective hot air recycling device can save energy without hot air or dust discharging.
- Can match with SAL-900G to realize the two-stage loading function.
- Hot air recycler, blower inlet filter, air filter, cyclone dust collector, magnetic base, hopper magnet, Euro suction box as your options.
