SHINI PLASTICS TECHNOLOGIES, INC. <a href='http://www.miitbeian.gov.cn/state/outPortal/loginPortal.action' target='_blank'>粤ICP备16031120号-1</a> Language
Волюметрические дозаторы – SCM
Волюметрические дозаторы – SCM

BACK
Inquiry
E-Catalog
DOWNLOAD
Introduction
Волюметрические дозаторы серии SCM предназначены для автоматического пропорционального смешивания первичных материалов, измельчённых, маточной смеси или добавок. Редукторный двигатель с передаточным отношением 38: 1 или 75:1 соединен с дозирующим винтом диаметром 12, 14 или 16 мм, чтобы дать в общей сложности шесть моделей с выработкой в диапазоне от 0,1 ~ 32 кг/ч. Двухцветные дозаторы могут быть собраны из двух одноцветных дозаторов, если требуется. Возможны пять компонентов автоматического смешивания, если клиенты применят четырехцветные дозаторы.
'
Свойства
  • Dosing screws are chrome plated for durability.

  • Unit is comprised of standard modules for ease of cleaning, disassembly and interchangeability.

  • Three-tube hopper magnet is equipped at the base of single color doser to absorb metal impurities so to prevent screw of moulding machine from damage.

  • Blender is a standard equipment for double color doser to make the material evenly mixed, while also a optional equipment for single color doser to do so.

  • Main material hopper is a standard equipment for double color doser. It is optional for single color doser.

  • External signals can be directly interfaced with control box.

  • The current operation mode can be recorded, unaffected by power failure so operation would be returned to normal when power is on.

  • Forced material cleaning is convenient to replace masterbatch.

  • Applicable on extrusion machines, just need to make a few wire replacements.

  • Rotating speed can be automatically adjusted according to extruder processing speed, which maintains the fixed proportion of masterbatch.

  • 50 units of parameter recipes are available for permanently recording the period of material discharging and finished products weight (for extruder, it is max. throughput per minute).

  • Use brushless DC motor and free from maintenance.

  • Both master blockage and overload can be detected, then machine will halt and sound alarm.

  • Based on customers demand, some mold cycles can be set to add additives periodically so that micro-metering can be achieved.