1.Cooling range 7~25oC/44.6oF~77oF.
2.Insulated water tank made of stainless steel.
3.Equipped with anti-freeze thermostat.
4.Adopt R410A refrigerant, used to improve coefficient of performance (COP) and R410A is ozone-friendly.
5.Refrigeration loop controlled by high and low pressure switches.
6.The compressor and pump both have overload protection.
7.Standard equipped with the hot-gas bypass valve, with the control accuracy reaching ±1oC/1.8oF.
8.All adopt quality compressors from major supplier.
9.Middle Pressure Pump is standard.
10.Adopts tube-in-shell condenser design. Without any need of cooling water for excellent heat transfer and rapid cooling.
11.Equipped with RS485 communication interface to realize centralized monitoring.
12.The plate heat exchange is equipped with the stacked filter.
13.The stainless steel water pipe adopts PVC-U that is environmental friendly for long service life.
1.High pressure pump are optional to meet any pressure requirements.
2.Water tank level sensor is available to detect whether the water level is normal.
3.Solenoid valve is optional to prevent compressor re-start and the liquid impact phenomenon by cutting the refrigerant immediately after downtime.
4.Refrigerant indicator can be opted to detect the refrigerant and the water ratio.
5.Optional flow switches to ensure system works in sufficient water quantity.
It is applied to plastics industry to precisely control moulds temperature so that molding cycle can be reduced and quality would be improved. Also SIC-W-R2 series can be applicable for electronic and machinery manufacturing to ensure normal operation temperature for devices.