Dual-purpose Water/Oil Heater STM-W/O

2021-09-29

Share to:

Adopt water or oil as the heat transfer medium, the maximum operating temperature for water is 90℃/203℉, and oil is 160℃/320℉.
4.3" Touch screen controller with easy to use HMI and clean display.
P. I. D multi-stage temperature control system can maintain a mould temperature with an accuracy of ±0.5℃/0.9℉.
Programmable heating capacity in 3kW, 6kW, or 9kW via HMI.
Pump reverse function for mould drain.
Vacuum mode for leak stop function.
Multiple safety devices including power reverse phase protection, pump overload protection, overheat protection, and low level protection.
Modbus RTU data communication via RS485.
Return water or oil temperature is available as an option, and add "TS" at the end of the model code.
Digital flow meter is available as an option, and add "V" at the end of the model code.
Digital pressure gauge is available as an option, and add "P" at the end of the model code.